Point D’ACCES ALTAI SUPER WIFI CPE (ALTAI-C1N)

POINT D’ACCES ALTAI SUPER WIFI CPE (ALTAI-C1N)

Max. LOS Access
1 km/ext. (5 GHz)
Max. LOS CPE
4 km to A8-Ein(ac)
3 km to A3-Ei
Max. LOS Bridge
13 km
Max. Data Rate
300 Mbps
Super Long Range Coverage
Wireless Interface
802.11a/n (2×2) Radio
Operating Mode                   AP/ CPE/ Bridge/ Repeater
Standard                                  IEEE 802.11a/n
Operating Frequency          5.150 – 5.350 GHz
5.470 – 5.725 GHz
5.725 – 5.850 GHz
Transmit Power                       29 dBm (Max.)
26 dBm (Per Chain)
Receiver Sensitivity
802.11a         54 Mbps            -83 dBm
6 Mbps              -96 dBm
802.11n         HT20                   -95 dBm
HT40                   -91 dBm
16 SSID (Max.)
802.11h*, 802.11k*, 802.11r*, 802.11v*, 802.11w*
Hotspot 2.0
Altai AirFi™ Throughput Optimization
Band Steering
WMM (802.11e)
Antenna
Built-in 5 GHz Antenna          14 dBi Dual Slant ±45° Sector
Horizontal Beamwidth         35 – 45° (-3 dB)
Vertical Beamwidth             15 – 20° (-3 dB)
Front-to-back Ratio               -20 dB (Max.)
Networking
Switch (Bridge) and Gateway Mode
IPv4/ IPv6 Dual-stack
NAT
DHCP Client/ Server
PPPoE Client
VPN (IPsec)*
VLAN
Bandwidth Control Per VAP/ Client
Multicast Rate Filter/IGMP Snooping
Security
Authentication – Open system, Shared key, WPA/ WPA-PSK,  WPA2/ WPA2-PSK, 802.1x (EAP-PEAP/ TLS/ TTLS/ SIM/ AKA)
Encryption – WEP, TKIP, AES
Inter/ Intra-client Isolation
MAC-based Access Control (White/ Black List)
RADIUS
Active directory
Firewall*
WIPS*
Management
Cloud or Server-based Management by AltaiCare
Controller-based Management by Access Controller
Web User Interface
Command Line Interface (SSH)
SNMP v1/ v2c / v3*
MIB2/ IF-MIB/ Altai Enterprise MIB
Syslog
Auto Channel Selection and TX Power Control
Spectral Analysis*
KPI Monitoring*
Client OS Detection*
Physical Specification
Dimension                               242 x 80 x 27 mm
(excluding mounting)
Weight                                      0.4 kg
Mounting                                  Desktop, Pole, Wall or
Window-mounted
 Network Interface                 10/100 Mbps Ethernet Port
LED Display                              Main Power Status
Ethernet Status
8-level Signal Strength
Power Supply                    (User configurable)
Power Supply                          18V Passive PoE PD or 802.3af
PoE PD via Adapter
Power Consumption            6 W (Typical) / 8 W (Max.)
Environmental Specification
Operating Temperature     -20 °C to +55 °C
Storage Temperature          -40 °C to +80 °C
Humidity                                   5 – 95% (Non-condensing)
Wind Loading                         Up to 200 km/h (124 mph)
Weatherproof                        Outdoor UV Stabilized Plastic
IP55 Compliant